The quality of the cut produced by a saw machine depends on the selection of the right blade. There are countless options available in the market. Selecting the best table saw blade for ripping maple suitable for your saw machine becomes challenging even for the expert woodworkers.
We have compared the features, pros, and cons of the five most reliable saw blades for ripping maple. All of them are popular for their excellent ripping quality. Our top choice is Freud 10” X 30T Industrial Glue Line Ripping Blade (LM74R010). Freud’s are famous for their outstanding quality blades.
Top 05 Best Table Saw Blade for Ripping Maple Reviews
01. Freud 10” X 30T Best Table Saw Blade for Ripping Hardwood (LM74R010)
- 10" Blade Diameter, 30 Teeth, TCG Grind, 5/8" Arbor, .118" Kerf, 12° Hook Angle
- Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
- Heavy-Duty Thick Kerf and Plate ensure a stable, flat blade for long cutting life
Freud’s blades are exclusively designed to deliver the highest quality cutting performance. They are made from TiCo High-Density Carbide for superior performance and extended use.
The blade is coated with Freud’s Red Parma- Shield, which makes the blade resistant to friction and prevents heat build-up and corrosion.
The blade’s diameter is 10,” and it has 30 teeth. It comes with a TCG grind, 5/8″ arbor, and 12 degrees Hook Angle. It features Laser-Cut Anti-Vibration Slots to ensure a cleaner finish, longer blade life, and noiseless operation.
- It gives a fine cut that can be felt through sharp edges.
- It can cut up to 1 ½” hard maple.
- It gives zero burnings even on hardwoods.
- No sanding is required while using this blade.
- The cutting process is much quieter as compared with other blades.
- It is ideal for cutting a glued-up panel.
- It remains sharp for a long time.
- It can produce high pitch buzz during milling.
- The cut edge may have some crosshatching, scalloping, and tear out.
02. Freud 10” X 24T Best Table Saw Blade for Plywood (LU87R010)
- 10" Blade Diameter, 24 Teeth, FLAT Grind, 5/8" Arbor, .094" Kerf, 20° Hook Angle
- Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
- Thin Kerf allows for faster feed rate and reduced waste
This Freud 10” LU87R010 blade is designed for ripping in hard- and softwood. It has 24 teeth made of thick, TiCo High-Density Carbide tips for efficiency and durability. Further, they are protected with Freud’s Parma-SHIELD coating to prevent friction and resultant heat build-up. It also prevents the blade from corrosion.
The thin kerf reduces material wastage and gives clean cutting in a short time. It is also suitable for crosscutting wood and cutting plywood. This saw blade is ideal for materials with a thickness between ¾ and 2- ¾ inches. It comes with a 5/8” arbor and 0.094 kerf.
It features 20 degrees Positive Hook Angles for fast and convenient feeding. It cuts along the grain at an incredible speed. This blade is designed explicitly by Freud’s for ripping with clean and accurate results.
- It rips off treated regular pine-like hot butter.
- It has larger gullets and better anti-vibration cuts.
- It does not leave any burn marks.
- It gives a clean, smooth cut.
- It can be re-sharpened multiple times.
- It does not lose its sharpness upon multiple uses due to its Carbide tips.
- It may give a scalloped cut if used on thicker woods.
- It is not suitable for crosscutting.
03. Diablo D1080X ATB Best Saw Slade for Cutting Hardwood Flooring, 10”
- The product is 10x80T Diablo Blade
- Easy to use
- The product is manufactured in China
The Diablo D1080X ATB is designed for trim carpenters, cabinetmakers, and hobbyists. It gives exceptional results with crosscuts in ultra-fine wood. This high-quality blade is designed for precision and accuracy, can be used for oak, melamine, veneer plywood, and pine.
The Tico Hi-Density Carbide formula protects blade sharpness for extended use that prevents wear and tear. The Parma-Shield Non-Stick Coating enhances resistance to heat and corrosion. It is a 10inch 80T ultra finish cut off blade with a 5/8″ arbor and can be used in table and miter saws.
The blade has laser cut 80 Hi-ATB (alternate top bevel) teeth with a thin 0.98-inch kerf in between. This feature maximizes the cut accuracy and precision. It also increases work efficiency and reduces operation time.
It features laser-cut stabilizers that reduce noise and vibration. It also keeps the blade cool and reduces blade warp.
- It gives glassy, smooth cut.
- It can be used for hardwood or plywood.
- It gives splinter-free cuts with smooth edges.
- It cuts very efficiently, and you can feed wood at an average speed.
- The cuts are shiny smooth with minimal chipping.
- It remains sharp for a long time due to its Carbide coated tips.
- It gives noiseless cutting operations.
- High ATB leaves a little point sticking up from the bottom of the kerf.
- The red paint may rub off from the blade.
04. DEWALT 10-Inch Table Saw Blade, ATB, Ripping, 5/8-Inch Arbor, harsh Coat, 24-Tooth (DW7124PT)
- Premium Micro-Grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering
- Precision Balanced, Laser-Cut Body provides extremely accurate cuts
- Exclusive Dampening Slots reduce vibration to enhance cutting accuracy
The DEWALT 10-Inch Miter/table saw is made with Premium Micro-Grain carbide to give ultra-sharp cutting edges. It reduces splintering and offers clean and accurate cuts. The edges remain sharp for more extended periods and can be re-sharpened when required.
The blade is manufactured with a Precision Balanced Laser Cut Process for extended precision and accuracy. The thin kerf fastens the feed rate, which further contributes to precise and clean cutting.
It features exclusive dampening slots that reduce vibration and increase cutting capacity. The blade edges are coated with a specialized Coat Finish, which protects the blade from friction, heat, and gum. Thus increases the life of the blade.
- It leaves cleaner cuts.
- The edges stay sharp for extended use.
- It can be re-sharpened many times.
- These blades increase the effectiveness and durability of the saw machines.
- They give good value for the price, and you will not regret buying them.
- They can be used with smaller saws.
- They are better suitable for use with ripping boards instead of cutting, because of fewer teeth.
- It gives average cut quality and performance due to very thin kerf.
- The blades with redesigned collar configuration are not much sharp and accurate as of the previous ones.
- It gives a slower cutting performance.
You may explore the Top 03 Best Miter Gauge For The Dewalt Table Saw
05. WEN BL 1060 10-Inch 60-Tooth Fine-Finish Professional Woodworking Saw Blade for Table Saws
- Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
- Perfect for slicing through both hard and softwoods of all kinds
- Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
WEN BL 1060 is a 10” blade for miter and table saws. It gives precise and accurate cuts and can be used for both hard and softwoods correctly. With a 5/8″ arbor it provides a speed of up to 6000 RPM.
It features an ultra-thin 1/10″ kerf for clean cutting. It is made of 60 Carbide tipped teeth for accurate cutting of pine, oak, poplar, maple, cherry, and walnut trees. The blade retains its straight shape and sharp edges for long-lasting performance.
It features heat expansion slots that help the blade expand and contract to give maximum accuracy. The unique protective coating prevents corrosion, rust, heat, and deterioration.
- It gives a reliable and accurate performance.
- It is a lightweight, ultra-thin blade which gives maximum efficiency for ripping and crosscutting.
- Kerf size is only 1/10”.
- It has a long-lasting teeth sharpness.
- It can be re-sharpened multiple times.
- It is more suitable for crosscutting due to its more significant number of teeth.
- It may produce smoke in the beginning.
- It cuts at a relatively slow speed.
- It does not feature TiCo carbide coating.
How to Choose the Best Table Saw Blade For Ripping Maple? – Buying Guide
The right saw blade is the fundamental part of every successful woodworking project. Blade diameter, number of teeth and kerf, arbor hole size, and the thickness of the cut made by the blade are essential factors that a woodcutter must be aware of. It is also better to check the specified type of machine for the blade and maximum RPM (Rate per minute). We have explained them in detail so that the beginners in this field may learn about saw blades.
Type of Your Saw Machine:
Matching the type of blade with your machine specifications is essential to obtain the desired results. When a blade that is not compatible with the machine is used, the results may be drastic.
The Type of Materials:
Choose a blade that suits the type of materials you use. Using a blade is not intended for the specific material you are using will not give accurate cuts.
Moreover, it can also destroy your material by chipping or splintering. Using an inappropriate blade will decrease the blade’s sharpness and adversely affect the performance of your machine.
Types of Cut Required:
The number of teeth on a saw blade defines the type of cut it will produce. The edges with more than 40 teeth are better for crosscutting. However, ripping is better done by blades with fewer teeth. A greater number of teeth is required for crosscutting.
Specialized Blades or Generalized Blades:
Are you a perfectionist and use a separate blade for each cutting operation? Or are you lazy enough and never bother to change your blades? Consider your habits and convenience before purchasing.
You may purchase separate blades for crosscutting and ripping with perfection. Or you may select a combination blade for convenience.
Factors to Consider Before Buying a Saw Blade
To buy the best blade for a saw for ripping purposes, you must consider the specifications of that blade. These include the number of teeth, the gullet’s size, the tooth configuration, and the hook angle.
The space in front of each tooth is called the gullet. It allows chip removal, and its size determines the size of the chip removed. In the ripping process, the chip size is bigger, therefore, deeper gullets are essential to handle the large chunks of material.
The gullets on crosscutting blades are smaller as the chips removed are smaller and fewer. The gullets on a combination blade are designed to handle both ripping and crosscutting.
The Number of Teeth:
A more significant number of teeth on a blade ensures smoother cuts whereas fewer teeth are intended for ripping. Most of the ripping blades come with as few as 24 teeth. They are designed to remove the material with astonishing speed.
You can’t expect a ripping blade to give smooth cuts, but it should rip through hardwood with minimal effort to leave a clean cut. On the other hand, crosscut blades should yield smooth cuts without splinter. The crosscuts require a slower feed rate to appear smooth and precise.
Blade Tooth Configuration:(Saw Blade Teeth Guide)
The configuration defines the shape of the saw blade teeth and how the teeth are grouped. The configuration determines the type of cut the blade is suitable for;
Flat Top (FT):
The Flat-Top teeth are suitable for ripping hard and softwoods. They help the blade quickly and efficiently remove the material without producing splinter.
Alternate Top Bevel (ATB):
ALTERNATE Top Bevel is used when smoother crosscutting of natural woods is required. It may also be used to crosscut the veneered plywood. In ATB, the blade teeth alternatively take a right- and left-hand bevel and produce cleaner cuts than flat-top teeth.
Combination Tooth (Comb):
Combination blades are intended for both ripping and crosscutting. There is one FT after every four ATB teeth and a large gullet between each group.
Triple Chip Grind (TCG):
The triple chip grinds are used for cutting harder materials such as laminates, MDF, and plastics. There are two types of teeth in TCG, flat raking teeth and higher trapeze teeth, arranged in an alternating way. They may also be used on non-ferrous metal cutting blades.
Alternate High Top Bevel (HI-ATB):
The Hi-ATB produces extra-fine crosscuts. It can cut surfaces with melamine coating without chipping. The high bevel angle causes the edges of the blade to work as a knife.
The hook angle has a fundamental role in determining the blade operation. A positively high hook angle is associated with faster feed rate and aggressive cutting operations and is mostly used for ripping lumber and maple.
On the other hand, negative hook angles are used to inhibit fast feed rates, blades climbing, and binding tendencies. They are mostly used in radial-arm saws and miter saws.
The kerf width describes the slot in which the blade cuts in the material. You will find both full-kerf and thin-kerf blades in the market.
Full-kerf blades are used in saws having 3 hp motors and cut a 1/8″ slot on the material. Thin kerf blades are characterized by kerf width less than 1/8”. They are suitable for table saws with less than 3hp motor.
Thin kerf blades require less power, and they allow an appropriate feed rate without the danger of bogging down. Bogging can lead to a distorted blade or burns on the cut surface. Therefore low kerf width is essential when working with saws having less than 3hp motor.
High quality saw blades come with teeth having carbide tips. This carbide is fused with the steel blade. These carbide tips determine the time in which the blade will remain sharp and the quality of the cut it will produce. Blades with high-quality carbide tips can be re-sharpened many times.
Consider the size of the arbor hole concerning the shaft of your saw. Blades with circular arbor holes come with a removable piece that helps them fit in a saw with a diamond-shaped arbor.
Are You Using The Right Saw Blades
You can “cut” with any blade available on your workshop, but you need to understand the difference between right and wrong cutting blades. Here are a few checkpoints that indicate that you need to fix your blade.
- Is it causing needless aggravation and added machining?
- Are you becoming habitual to fixing poorly fitting joints?
- Are you taking cleaning up rough, burned cuts and tear-outs as your daily routine?
If your answer is in “Yes,” you are probably using the wrong blade.
What is the best table saw blade for ripping?
The general-purpose saws, which have about 40-50 blades, can be used for ripping and crosscutting. However, our recommendation is Diablo D1080X ATB Fine Finish Saw Blade.
Made with high-quality TiCo Hi-Density Carbide formula and coated with Parma-Shield Non-Stick Coating, this blade will last long and will resist day to day wear and tear. It is a 10-inch 80T ultra finish cut off blade which gives a clean, precise cut with high speed and accuracy.
Diablo is one of the most trusted brands by expert woodworkers because they manufacture high-quality blades within reasonable prices.
Are more teeth on a saw blade better?
As a general rule, blades with more teeth give smoother cuts. Blades with few teeth rip-off the material very fast and are not suitable for crosscutting. Most of the blades designed for ripping operation usually have 24 teeth, and they quickly remove the material along the length of the grain.
Blades with a greater number of teeth will feed the material slowly to produce very smooth and shiny crosscuts. 60 – 80 teeth are usually present on crosscutting blades. Combination blades can handle both ripping and crosscutting with nearly 40 – 50 teeth.
Can you use a crosscut blade for ripping?
Crosscut blades are designed to cur short grain, whereas ripping blades are intended for long grain. For the woodcutters who avoid the hassle of changing cutters, combination blades are a better solution.
The combination blades allow both crosscuts and ripping and usually have 40 to 50 teeth. A crosscut blade will not give satisfactory results for ripping soft and hardwoods.
How often should I change my table saw blade?
You should replace your table saw blade once you start noticing any of these problems:
- It starts binding.
- It tears or chips the material unnecessarily.
- It gets dull.
- It has worn or chipped carbide teeth.
- They hit a screw or a hard knot.
- After cleaning it 2-4 times, you may sharpen or replace a blade.
There is no exact formula regarding the change of blade. The time required for replacing a blade depends on its quality.
How do you sharpen a saw blade?
You can sharpen your saw blade by the following essential steps:
- You need to wear protective gear and ensure that the saw is unplugged from the socket. This process can cause severe injuries if done carelessly.
- Keeping the diamond blade in place, touch the bottom of the tooth carefully.
- Using full back and forth strokes, sharpen each tooth carefully.
- Lubricate the blade with oil.
- Check the performance on a rough piece of material.
By sharpening the blade, you can save a lot of money and energy.
Saw blades can cut anything from lumber and sheet goods to fancy joinery. You may use separate blades for ripping and crosscutting, or you may use a combination blade.
Spending a fair amount on buying a reliable brand is undoubtedly a wise decision. The best table saw blade for ripping maple would ensure quality ripping with high precision, better joinery, and a satisfied woodworker.
More expensive blades have more carbide, and as a result, they remain sharp for extended periods. They can also withstand more sharpening and last longer than the cheaper ones.
- Mobile Base For Table Saw Review
- Best Table Saw Miter Gauge
Last update on 2020-12-03 at 01:26 / Affiliate links / Images from Amazon Product Advertising API