Best Wet Tile Saw For DIY-2020 (In-depth Buying Guide)

DEWALT Wet Tile Saw with Stand, 10-Inch

Cutting tiles can prove cumbersome if you are using the wrong saw. Everyone wants to achieve straight clean cut tiles, free of wavering ends and chips. Choosing the best wet tile saw for DIY is not easy given there are many types of tile saws available in the market.

After studying the different available models, I would highly recommend you get the Dewalt wet tile saw. It comes with its own stand and gives you straight clean cuts in the least amount possible. As you read through this review, you will learn about the top 3 best wet tile saw for DIY as well as other crucial information that may prove useful in your purchase and use of a tile saw.

Top 03 Best Wet Tile Saw For DIY Reviews and Buying Guide

Product Image
DEWALT Wet Tile Saw with Stand, 10-Inch (D24000S)
SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System
SKIL 3540-02 7-Inch Wet Tile Saw,Red
Weight
69 pounds
24 pounds
17.69 pounds
Power Source
AC
Corded-electric
Corded-electric
Miter Angle
22.5 and 45 degrees
0, 22.5, 45 degrees
0-45 degrees
Tile Size Limit
28” x 28”
18” x 18”
12” x 12”
Product Image
DEWALT Wet Tile Saw with Stand, 10-Inch (D24000S)
Weight
69 pounds
Power Source
AC
Miter Angle
22.5 and 45 degrees
Tile Size Limit
28” x 28”
Product Image
SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System
Weight
24 pounds
Power Source
Corded-electric
Miter Angle
0, 22.5, 45 degrees
Tile Size Limit
18” x 18”
Product Image
SKIL 3540-02 7-Inch Wet Tile Saw,Red
Weight
17.69 pounds
Power Source
Corded-electric
Miter Angle
0-45 degrees
Tile Size Limit
12” x 12”

Product-01: Dewalt Wet Tile Saw Review

DEWALT Wet Tile Saw with Stand, 10-Inch (D24000S)
  • Your purchase includes One Dewalt 10-Inch Wet Tile Saw, Wet Tile Saw Stand, 10-Inch XP4 Porcelain Tile Blade, Submersible Pump, Water Pan, Side Water Tray, Rear Water Tray, Cutting Cart Side Extension, Angle/Rip Guide, Blade Wrench & Hex Wrench
  • Tool dimensions: 36” L x 29” W x 24” H. Tool weight: 69 lbs. Voltage – 120V. Peak Horsepower – 1.5 HP
  • Other specifications: Arbor Size – 5/8”. Blade Diameter – 10". Diagonal Cut Capacity 18” x 18”. Max depth cut – 3 1/8”. Max Rip Capacity with Plunge – 28”. Bevel Capacity – 45ᵒ

Salient Features:     

  • Weight:              69 pounds
  • Power source:  AC
  • Miter angle:      22.5 and 45 degrees
  • Tile size Limit: 28” x 28”

Dewalt is one of the heaviest tile saws available in the market, weighing 69 pounds. Despite this, it can be set up and transported by one person with ease. It comes with its own stand that holds the saw and provides the perfect workspace. The aluminum framing and stainless steel rails of the stand are designed for durability even in the harshest working environments. You can easily fold the stand for easy storage and transport.

Your order will arrive in two boxes, the saw, and the stand separately. The saw motor has the ability to tilt and lock at both 450 and 22.50 without the need for a cart block, making it easier to make angle cuts. Aligning the table will be easy due to its adjustable rollers.

The saw can cut a 28” tile with a plunge and an 18” tile on a diagonal. The cut line indicator helps you make accurate cuts. A 3-1/8” depth of cut makes the saw ideal for cutting a variety of V-caps and pavers.

The tile saw frame is made of stainless steel giving you clean straight cuts. To ensure smooth operation, Dewalt is fitted with an adjustable dual water nozzle, on the rear, and at the sides. Being adjustable, you can alter them to suit your needs. The rear and side water attachments capture overrun water ensuring it is contained in the 5-gallon pan.

Once finished using the saw, the removable cutting curt allows you better access to the saw for easier cleaning. The manufacturer includes a user guide in the package to help guide naïve users.

Pros:

  • 3-year warranty
  • Durable
  • Fast and efficient
  • Portable
  • User manual included

Cons:

  • Expensive
  • Bulky
  • Requires experience

Product-02: SKIL 3550-02 7″ Wet Tile Saw with HydroLock

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System
  • Hydro Lock Water Containment System keeps water contained near the blade and reduce clean-up time
  • Sliding Side Extension provides support for tiles up to 18 x 18-inch
  • Aluminum table top is a durable, rust-resistant surface

Salient Features:

  • Weight:              24 pounds
  • Power source: Corded-electric
  • Miter angle:      0, 22.5, 45 degrees
  • Tile size limit:  18” x 18”

Most wet tile saws cause a major water splash that is not ideal for the area under renovation. However, with the SKIL 3550 7” wet tile saw, you can set up the tile cutting area in the same that is being upgraded, saving you the back and forth journey.

The saw’s hydrolock water containment system results in the least water splash possible. Tidying up at the end of the day is made easier and shorter. The saw is fitted with a 7” diamond blade that gives efficient and smooth cutting.

SKIL 3550 7” wet tile saw comes with its own aluminum tabletop that is rust free and durable. The tabletop is fitted with a tile slide extension that accommodates tiles as large as 18” x 18’. The motor can be inclined at 0, 22.5, and 45 degrees giving you the flexibility required to make different types of cuts.

This amazing tool allows you to make a precise angle cut through its adjustable rip fence that is fitted with a miter gauge. The blade can be spun up to 3,600 RPM. Given that it weighs only 12 pounds, it is lighter than most saws in the market. Transport and set up is made easier.

Pros:

  • Durable
  • Cleaner working area
  • Flexible
  • Clean accurate cuts
  • Lightweight

Cons:

  • Warranty not included
  • Expensive
  • Not ideal for tiles greater than 18”

Product-03: SKIL 3540-02 7″ Wet Tile Saw Review

SKIL 3540-02 7-Inch Wet Tile Saw,Red
  • Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
  • Adjustable rip fence with miter gauge for accurate straight and miter cuts
  • Blade cooling water reservoir to keep blade cool while minimizing dust and debris

Salient Features:       

  • Weight:              17.69 pounds
  • Power source:  Corded-electric
  • Miter angle:      0-45 degrees
  • Tile size limit:  12” x 12”

SKIL 3540 wet tile saw is perfect for the homeowner who is on a tight budget. You will get a good quality saw that is efficient and durable.

Its stainless tabletop is rust-free, durable, and easy to clean. It can hold tiles up to 12” x 12”. This wet tile saw allows you to make miter cuts in a split second. The adjustable rip fence is fitted with a miter gauge for accurate and smooth miter cuts.

The 7-inch diamond blade allows for fast and smooth cuts. It is also durable and easy to clean. SKIL 3540 is flexible enough to accommodate your more complicated designs. The bevel gives you a range of cut types from 0 to 45 degrees.

The unique blade water cooling system keeps the blade cool during use, protecting you from contact burns. Besides, it prolongs the long life of the saw. The water splash minimizes dust and debris making the cutting process cleaner and easier.

SKIL 3540 weighs only 17.69 pounds, light enough for a one-person setup and transport. You can definitely not go wrong with this wet tile saw as you get quality on a budget.

Pros:

  • Affordable
  • 1-year warranty
  • Lighter
  • Durable
  • Minimal debris and dust
  • Wide range of cut types
  • Fast and efficient

Cons:

  • Limited tile size – 12” x 12”
  • Messy working area

04 Biggest Things to Look for in the Wet Tile Saw

You have read in excruciating detail about the top 3 wet tile saws you could pick from. But what are the most important features for you to look out for as an individual? Below we will discuss the features you should always put into consideration when purchasing a wet tile saw.

Feed design:

There are three major feed designs found on wet tile saws. There are models that have a sliding table where you place your tile while the blade remains stationary. They are a pleasure to use though they are easily damaged by knocks on the table or jamming of the sliding mechanisms. Only one side of the sliding table is open limiting the size of tiles you can work with.

In the bridge saw the design, the tile, and its platform are stationary while the blade moves back and forth. Both sides of the platform are openly giving you the freedom to work with any size of a tile. Their greatest disadvantage is that they tend to be huge and bulky. They also require constant maintenance.

With the stationary design, nothing moves. The platform and the saw are completely stationary. To make a cut, you push the tile through the platform. They are small, light, and portable. Their size does not limit the size of tiles you can cut so long as you can push the tile through. However, they do not deliver clean cuts.

Tile size:

Tiles size ranges from as small as less than an inch to tiles larger than 2ft. The type of saw you pick determines the tile size you will be working with. While some models are flexible, others are very specific. If you are not working with a constant tile size, pick a model that will allow different tile sizes.

Water feed:

For most sliding table and bridge saw designs, the water reservoir is located under the platform. The jets should point directly at the blades. If the blades are not staying wet during use, then the water feed is not of any use. Double-check that the water jets are accurately aiming the blade.

In saws with the stationary design, the water reservoir is held where the blade sits. Water is pushed above the tabletop as the blade spins. The water is pushed back down to the blade by the plastic housing. Holes on top of the platform ensure water flows back into the reservoir so you are not losing water. The greatest disadvantage is that you are left wet.

Cut quality:

What matters the most is the quality of the cut you are getting. Chipped, uneven cuts will leave you disappointed and with unattractive work. It will not matter how much the saw costs so long as it delivers straight smooth cuts.

What Size Wet Tile Saw Do I Need?

The size of the hole saw machine does not matter so long as you go adequate space in your work site. If this is not the case, choose the saw size that fits your workspace. On the other hand, the size of the blade does matter. The general rule is – the longer the blade the deeper the cut. Most tiles are 1/8” to 1” deep, thus you can easily make your cut using the standard 8” blade.

The cutting length of the saw also matters. Tiles vary in size so do the length that a wet tile saw can accommodate. Figure out the size of the tiles you will be working with to be able to choose the most appropriate model.

How to Cut a Tile with a Wet Tile Saw

Tools you will need:

  • Water
  • Wet tile saw
  • Ceramic tiles
  • Rags
  • Safety gear – safety goggles, gloves

You can now proceed to cut your tiles:

  • Start by measuring and making a mark on the tile to indicate where you intend to cut. Avoid permanent markers as they are hard to wash off.
  • Pour enough water into the tray. Ensure the blade is sharp. If not replace it with a diamond blade.
  • Put on your safety gadget.
  • Place the tile on its platform, align it accordingly before adjusting and locking the fence. Not all wet tile saws have a fence.
  • Hit the start button. Depending on the feed design of your wet tile saw, let the tile pass through or slowly push it. Do not force anything. Keep your hands off the blade.
  • Once the tile has passed through, hit the stop button. Note the blade continues rotating for a few seconds before it stops. Wait until then to remove your tile pieces.
  • Repeat for the next tile and ensure you clean up after you are done.

Safety and Efficiency Tips

  • Before you begin working, ensure you carefully read the instruction manual to familiarize yourself with the saw.
  • Work on a level surface for comfort and efficiency
  • Always ensure you protect yourself by putting on gloves and safety goggles.
  • Ensure the tray has adequate water for your workload
  • Correctly place the tile. The top part should face where the blade cuts from.
  • Keep your hands away from the blade
  • Let the tile smoothly flow. Do not force anything
  • Wait until the blade stops turning to collect your tile pieces.

Conclusion

The wet saw is the fastest and most efficient way to cut tiles. We have looked at some of the best wet tile saw for DIY available in the market, important features to look out for, and how to use your wet tile saw. It is our hope that this information has helped ease your decision-making process.

Always do thorough market research before settling on one to ensure you get value for your money. The most important thing to be on the lookout for is the quality of cuts the saw will deliver. If it cannot give you a clean-cut, it is not worth it despite its price.

FAQ

Wet tile saw vs. Manual tile cutter – Which should I buy?

Definitely go for the wet tile saws as they take your tile cutting abilities to a whole new level. They may be expensive and create a mess, but the quality of cut you achieve will be worth it. While manual tile cutters inexpensive, they require you to put in the time and energy. Their cuts are not as good and the cut types they can make are limited.

What material can a wet tile saw cut?

A wet tile saw effectively cuts through ceramic and glass and is unsuitable for cutting wood and metal.

How do you cut tile with a wet saw without chipping it?

To avoid chipping, work slow but sure. Always ensure your blade is sharp. If not replace it. Ensure you put enough water in the tray to cool the blade throughout the cutting process. Let the top of the tile face where the blade cuts from.

Why is my tile chipping?

While chipping is not uncommon, there are a few mistakes you could be making that could be making your tiles chip. You could be working too fast or your blade is not sharp enough. The water in the tray is not enough, causing your blade to overheat and jam while working. Also, you could be wrongly placing the tile on the platform. The top of the tile should face where the blade cuts from.

Last update on 2020-06-04 at 15:29 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment